Underwater Hull Cleaning Brushes
We ship worldwide!
Armada manufactures the largest line of underwater
cleaning brushes. All of Armada's brushes meet & exceed Navy
standards. Armada also designs & manufactures brushes to meet
15 different brush materials for cleaning any type underwater surface.
Consult Armada for your specific cleaning needs.
5 Row Underwater Cleaning Brushes!
Armada can also manufacture
brushes for custom applications that vary in size from 8",
10", 12", 15", 16", 18", 20"
in diameter. (203.2 mm, 254 mm, 304.8 mm, 355.6 mm, 381 mm, 406.4
mm, 457.2 mm, 508 mm)
||Silicon -- Paint-safe for removal of marine-fouling
Polypropylene -- Used for cleaning growth on
fiberglass, aluminum, steel and wood.
||Nylon -- Light fouling, grass and slime on fiberglass,
aluminum, steel, and wood.
||Grit -- Nylo Silicone Carbide available in 6
different grit materials, from heavy to light grit, on fiberglass,
wood, aluminum, and steel hulls.
||Flat Wire Steel Brush -- Heavy fouling of barnacles,
tubeworms, Zebra mussels and grass on steel surfaces. (Heavy Gutter
||Stainless Steel Row -- Medium growth slime, grass,
and barnacles on aluminum and steel surfaces.
Part #ASLPCB-3 and ASHPCB-3
for removing barnacles, heavy grass, and zebra mussels for
painted surfaces. Three cutter blades are required per brush.
Begin with the high profile cutter blades, and as the brush
wears, switch to low profile cutter blades. This will insure
maximum use of your brush! Navy approved. Barnacle Brush Cutter
Blades are available on the following brushes: Stainless,
Flat Wire, and Heavy Grit
Low Profile --
High Profile -- ASHPCB-3
Note: The Barnacle
Brush Cutter Blades are paint safe, and are only available
in 15" (381 mm) and 12" (304.8 mm) brushes.