AST 307 SeaRazor SuperTwin
AS-T15 HB Twin Head Unit
AS-T12 HB Hull & Prop Polisher
AS 18 HB Hull & Prop Polisher
AS 16 HB Hull & Prop Polisher
AS 16-3M9 Prop Pro
AST-P-789 Twin Prop Polisher
Hull Cleaning Brushes
3M Marine Polishing Discs
Prop Roughness Scale
Barnacle Cutter/Brushes
Mask & Regulator
AS-108 Hydraulic Power Package
AS-20HP Honda Power Pack
AS-20HPV Vanguard Power Pack
AS-25LPD Diesel Power Pack
AS 20LPD Diesel Power Pack
Hydraulic Hoses & Reels
AS 175 Air Compressor 
AS-V160 Air Compressor
Dive & Safety Harnesses
Articles on Prop Cleaning
Economics/Prop Polishing
Company Profile
Shipping Society Links
World Shipping Links
Cleaning Proposal
Nuclear Cleaning
Ship Photo Albums
Contact Us

New! SeaRazzor Super Twin Brush Cart
Part #AST-307
U.S. Navy & Coast Guard Approved
Cleans a 62 inch (158 cm) path!

Brush Pedestal

New! Shown with optional barnacle plow!
New! Rebuildable heavy barnacle brush!

AS-85 LPD Diesel Power Pack

Hose Reel with lightweight floating hose

The SeaRazor Twin AST 307 is designed to be a fast and efficient underwater cleaning system, with a cleaning path of 62 inches (158 cm). It's specifically designed to clean the heaviest marine growth on large VLCC ships to the smallest freighter, floating drydocks, and any underwater structure. Approved for cleaning all soft ablative paints.

Cleans a 62 inch (158 cm) path!

It's specifically designed to clean the heaviest marine growth on large VLCC ships to the smallest freighter, floating drydocks, and any underwater structure. The SeaRazor Twin reaches forward speeds of 90 feet (27.5 meters) per minute depending on the degree of fouling. The Twin is capable of effectively cleaning 27,900 square feet (8504 square meters) per hour theoretical. The Twin's major advantage over other systems is its use of 4 rebuildable aluminum brushes. This means higher profits because the operator only purchases brush bristle material in bulk. Four rebuildable aluminum brushes are included with the AST-307 with brush holder pedestal. The brushes can be reloaded in less than 30 minutes on the job site with appropriate bristle material to meet every changing fouling condition. This means less downtime, less inventory, and higher profits. The unit's brush speed which is diver-controlled ranges from 0 to 300 RPM, minimizes paint damage even on the most sensitive ablative paints. Unlike other models that are dependent upon brush suction to adhere to the hull of the ship, the AST-307 uses a HYDRO IMPELLER SHROUD mounted on the backside of the unit facing away from the hull for maximum thrust and diver safety. This allows the unit to adhere to the side of the ship even in tidal flow up to 3 knots. It can move to other areas with the brushes turned off virtually eliminating paint damage. Inferior designs use a propeller mounted in a center hole which enables the unit to adhere to the side of the ship, but pulls all dislodged heavy barnacle and shell through the propeller which can cause propeller failure, hydraulic motor damage, and oil leaks. Even diver safety is a concern with lowered visibility from the debris.

  • Specifications:
    Removes barnacle growth up to 4 inches (10.16) to 6 inches (15.24) thick
    Required Hydraulic power 52 GPM (196 liters per minute) @ 2500 psi minimum
    Pressure rating 2500 PSI (17241 kPa) Max
    Cleans a strip 62 inches (158 cm) wide
  • 4 Rebuildable aluminum brushes are anodized for maximum corrosion resistance
  • Tool is constructed with stainless steel and corrosion resistant marine aluminum
  • Estimated tool weight: 525 lbs. (238 kg)
  • Brush Bristles Sold In Bulk: (sold separately)
    50 lb. bundle (makes seven brushes with 8" to 9" trim per brush)
    1. Galva Steel Rope (AST-307SSR)
    2. Nylon (AST-307N)
    3. Nylo Grit (AST-NG)
  • US Navy and Coast Guard approved
  • Approved for all Navies worldwide
  • Approved by all shipping societies
  • Approved for use at oil tanker terminals
  • Designed for a one diver operation and minimum support equipment and personnel
  • Manual diver operated steering.
  • Dive wheels mount directly to hydraulic motor shaft for maximum power transfer
  • Impeller is mounted directly to hydraulic motor shaft for safety and reliability
  • Diver controlled brush speed
  • Diver can adjust brush height independently while tool in use
  • When cleaning ablative paints, diver has full control of brush speed and height
  • Diver has full control when encountering changing hull contour and growth
  • All hydraulic motors are coated for maximum corrosion resistance
  • Brush holder pedestal
  • Both cleaning brushes are mounted directly on hydraulic motor shafts for maximum torque
  • Capable of cleaning against tidal forces of up to 3 knots
  • Speed control allows the diver to adjust brush speed for the most demanding commercial cleaning jobs.
  • Brushes turn in counter rotation neutralizing torque
  • Brushes clean by using the sides of the brush bristles in a gentle sweeping action
  • Wheels have true track tread for maximum traction on slick surfaces
  • Standard spare parts included

The AST-307 is powered by AS-85 LPD Diesel Power Pack (sold separately)

Package includes:
(1) AST-307 Sea Razor Twin Tool
(4) rebuildable aluminum brushes
(3) 50 lb. brush bundles - (1) grit, (1) cable, (1) poly
(1) brush holder pedestal
(1) 85 HP Diesel Power Unit
(1) Hose Reel with 300' lightweight floating hydraulic hose (1" supply, 1" return)

Prices & Specifications Subject to change without notice. Current production model may be different in appearance.

We ship worldwide by air and sea!
Armada Systems, Inc.
Phone (850) 664-5197 Fax (850) 243-4009
E-mail us at armadahull@aol.com